IE expo China 2025

Inlets and outlets for flow measurements remain a hot issue: many applications do not offer the appropriate installation conditions to maintain the recommended or required straight inlet and outlet runs. KROHNE presents the appropriate "0D/0D portfolio" for this purpose, consisting of the WATERFLUX water meter, the OPTIFLUX for wastewater, and the AF-E 400 for auxiliary and supply circuits, which can be used without straight inlet and outlet sections.

For more flexibility and efficiency, we present the modular Water Analysis Panel, a multi-parameter measurement system for water treatment applications. It consists of individual modules that can be combined to measure dissolved oxygen, turbidity, conductivity, pH and ORP. Depending on the requirements, the measuring system can be operated as a complete solution or with selected individual modules.

Flowmeters, flow controllers and flow accessories
 - For all industrial process applications
 - From cost-effective mechanical indicators to very advanced flow instrumentation
 - Maintenance and service tools, flow computers and other accessories for flow measurement

Complete portfolio for volume flow, mass flow, density and concentration measurement
- Wide selection of measuring principles
- For liquids, gases and steam
- For basic to very advanced process applications, CT measurements, hygienic applications and Safety Instrumented Systems

For all applications with conductive liquids
- From basic to demanding flow measurements, incl. custody transfer and safety-related applications (up to SIL 2/3)
- Designs and liner materials for virtually any application – from potable water to extremely adhesive, abrasive and aggressive liquids
- Large choice of nominal sizes up to DN3000 / 120"

For process and utility applications, energy and custody transfer (CT) measurements
- Comprehensive portfolio for gases, liquids and steam
- High temperature and cryogenic versions, variants for high pressure and higher viscosities
- Various designs: From clamp-on devices to multipath inline flowmeters

For simple and cost-effective flow measurement of gases or liquids without auxiliary power
- Glass and metal tube purgemeters for low-flow applications - Optional switches, 4...20mA, HART®, FOUNDATION™ Fieldbus, Profibus-PA
- Globally approved for use in hazardous areas and suited for safety related SIL 2 applications

For utility applications, advanced energy management and Safety Instrumented Systems (SIS)
- Sophisticated flowmeters with integrated pressure and temperature compensation and integrated energy calculator for advanced energy measurement
- Certified for Safety Instrumented Systems (SIS)
- Cost-effective and robust devices for harsh process conditions and/or basic applications

Transmitters, switches, indicators and accessories for level measurement
- For continuous level and interface measurement or point level detection
- Contact or non-contact measurement of liquids, pastes, granulates, powders, solids, bulk goods etc.
- For standard or demanding applications with advanced requirements, hazardous areas and Functional Safety (SIL)

For continuous level and interface measurement – contact and non-contact
- Various technologies: FMCW radar, TDR guided radar, ultrasonic, displacer, potentiometric, hydrostatic pressure
- For process and storage applications with liquids and solids
- Meet the requirements of various industries

Non-contact level measurement of liquids, pastes, granulates, powders and other solids
- Measuring distances up to 100 m / 328 ft
- Different antenna options, e.g. for corrosive or abrasive media, high pressure or temperature and applications with agitators
- Also suitable for hazardous areas, Functional Safety (SIL) or hygienic applications

Contact level measurement of liquids, solids or liquid-liquid interfaces
- Measuring distances up to 60 m / 196 ft
- Large choice of probes, e.g. for aggressive or abrasive media, high pressure or temperature and tanks with internals or boiling product surfaces
- Suitable for hazardous areas, Functional Safety (SIL) or hygienic applications

Non-contact level measurement of liquids, bulk and solids
- Measuring distances from 0.25...8 m / 0.82...26.2 ft (liquids), 0.25...3.5 m / 0.82...11.5 ft (solids)
- Resistant materials for transducers and process connections, e.g. for slightly corrosive media
- Also suitable for hazardous applications

Contact level measurement of liquids and liquid-liquid interfaces
- From entry level ultra-compact to advanced hydrostatic process pressure transmitters
- For a broad range of applications, with metallic and ceramic sensors
- Full compliance with hygienic, marine, hazardous area and safety related (SIL) applications

Assemblies, sensors, transmitters and accessories for temperature measurement
- Resistance temperature detectors (RTD) and thermocouples (TC) for industrial process and OEM applications
- Temperature assemblies, cable probes, compact sensors and tailor-made solutions
- Head and rail mounted temperature transmitters with safe and SIL approved designs

Process instruments for pressure and differential pressure applications
- Comprehensive portfolio: transmitters, primary elements, diaphragm seals and accessories
- Ceramic and metallic measuring cells
- For a wide range of industrial applications with liquids, gases and steam

Sensors, systems, assemblies, transmitters and accessories for process analysis
- Comprehensive portfolio for inline and online liquid analytical measurements
- Analytical sensors with and without integrated transmitter or complete measuring systems for all industries
- Installation equipment, signal converters and accessories to fit many requirements

For a wide range of analytical parameters
- For pH, ORP, conductivity, TSS, dissolved oxygen, free chlorine, chlorine dioxide and ozone, sludge level, turbidity or multiparameter applications
- From sensors with integrated transmitter to modular panels for liquid analytical measurements
- For any industrial requirements – from hazardous areas to hygienic environments

For OPTISENS sensors
- Display of readings and alarms
- Transmitters for on-site calibration and configuration of OPTISENS sensors
- Different housing materials

Electromagnetic flowmeter for utilities and industrial automation
- Flow measurement of conductive liquids, e.g. coolants, cold/hot water, chemicals, etc.
- Best-in class temperature range, accuracy, pressure drop and flow range
- Ultra-compact design for parallel installation and tight spaces
- 4…20 mA, pulse, frequency, Modbus, IO-Link

Electromagnetic flowmeter for applications with partially filled pipes
- With integrated capacitive level measurement for flow measurement of water and wastewater (≥10% pipe fill level)
- Accurate (±1%) and cost-saving alternative to open channel systems
- Flange: DN200…1600 / 8…64"
- 3 x 4…20 mA, pulse, HART®, Modbus, PROFINET

Electromagnetic water meter for district metering of potable water and custody transfer (CT) measurement
- Battery- or mains powered, with battery backup option (incl. Modbus)
- Integrated temperature and pressure measurement for leak monitoring
- CT: MI-001, OIML R49 up to DN600 / 24", no inlet/outlet runs needed
- Burial installation possible (IP68)

Ultrasonic clamp-on flowmeter for temporary flow measurement of liquids
- Portable, battery-powered meter used to collect additional flow data or for cost-effective on-site verification of inline flowmeters
- For pipes DN15…4000 / ½…160"; up to +120°C / +248°F
- Portable signal converter with integrated data logger
- Commissioning, monitoring and data analysis via a mobile smart device using the OPTISONIC 6300 P mobile app in combination with a USB cable or wireless Bluetooth connection®

Ultrasonic flowmeter for biogas, landfill and sewage gas applications
- 1- or 2-path meter for low-pressure biogas (dry or wet) with a high CO2 content
- Integrated gas volume correction and methane content measurement
- Lap joint flange: DN50…200 / 2…8", max. PN10 / ASME Cl 150
- Large turndown ratio (100:1)

Variable area flowmeter for liquids and gases
- Modular design: from mechanical indicator to 4…20 mA/HART®7, FF, Profibus-PA and totalizer
- Any installation position: vertical, horizontal or in fall pipes
- Flange: DN15…150 / ½…6"; also NPT, G, hygienic connections, etc.
- -196…+400°C / -320…+752°F; max. 1000 barg / 14500 psig

Vortex flowmeter for utility applications and energy management systems
- For liquids, (wet) gases, saturated and superheated steam (+240°C / +464°F)
- Integrated P+T measurement: direct output of mass, nominal flow, energy, gross/net heat
- Flange: DN15…300 / ½…12"; wafer version: max. DN100 / 4"
- 2-wire, 4…20 mA, HART®, FF, Profibus-PA

Radar (FMCW) level transmitter for powders and dusty atmosphere
- Continuous, non-contact level measurement in high and narrow silos, hoppers or containers
- 80 GHz radar, flush-mounted Lens antenna
- Measuring range: 0…100 m / 328 ft
- -50…+200°C / -58…+392°F; -1…40 barg / -14.5…580 psig