Description

回流到集热器的熔盐流量测量

要求

  • 过程温度高达 650°C
  • 高声速范围
  • 经过校准的管道式流量计

Description

熔盐的流量测量

要求

  • 过程温度高达 600°C
  • 高声速范围

Description

热盐罐的液位测量

要求

  • 过程温度高达 600°C
  • 非接触式的液位测量

Description

冷盐罐的液位测量

要求

  • 过程温度高达 600°C
  • 非接触式的液位测量

Description

回流到集热器的熔盐流量测量

要求

  • 过程温度高达 650°C
  • 高声速范围
  • 经过校准的管道式流量计

Description

熔盐进料的压力测量

要求

  • 齐平式高温隔离膜盒
  • 过程温度高达 600°C

Description

熔盐到 SG 的流量测量

要求

  • 过程温度高达 600°C
  • 高声速范围

Description

给水的流量测量

要求

  • 低电导率
  • 遵循电力行业的标准

Description

回流熔盐的体积流量

要求

  • 过程温度高达 600°C
  • 高声速范围

Description

高压蒸汽的流量测量

要求

  • 高温
  • 高压
  • ISO 5167、ASME MFC-3M、ASME PTC

Description

再热蒸汽的流量测量

要求

  • 高温
  • 高压
  • ISO 5167、ASME MFC-3M、ASME PTC

概览

Solar power tower in Concentrated Solar Power CSP power plant

Non contact high temperature level measurement in heat storage tanks

Numerous dual axis tracking concentrator mirrors (heliostats) reflect sunlight onto the top of the power tower. The central receiver absorbs the concentrated solar radiation and converts it into heat creating receiver temperatures up to 1200°C. A heat transfer medium (molten salt) transfers the heat to both the power storage system and the steam generator. The part of the heat stored in molten salt tanks is used later to continue electricity production during night-time. The steam generator is part of a conventional water steam cycle, generating electricity via a steam turbine and an electrical generator.

As in any power plant there are numerous measurements used to control the process and maintain its safety. KROHNE provides a complete portfolio of measurement solutions for concentrated solar power generation and can refer on field proven products and solutions with numerous references including temperature, (differential) pressure, level and flow. Flow measurement of heat transfer fluid and molten salt at variable high temperatures is achieved using the OPTISONC 4400 ultrasonic flowmeters which can cope with temperatures up to 700 °C, fast changing temperatures, and a wide range of media properties, including inhomogeneity and stratification in the flow. OPTIWAVE 7400 high temperature FMCW radar level measurement for the molten salt tanks. OPTIBAR pressure measurement of molten salt with flush mounted diaphragm systems suitable for high temperatures and harsh process conditions. Accurate flow measurement of heat transfer fluids with good long-term stability is essential to optimise the power plant performance, to get the maximum return out of the assets. The long experience KROHNE has obtained with the application of ultrasonic flow measurement in both liquid salts and thermal oil in numerous CSP installations provides the guarantee for reliable and economic operation covering all process phases from cold/warm start through to peak power production.

邮箱
联系方式
在线咨询